Title:  Design & Demonstration of 3D Glass Panel Embedded Package for Superior Bandwidth and Power Efficiency

Committee: 

Dr. Tummala, Advisor   

Dr. Naeemi, Chair

Dr. Swaminathan

Dr. Peterson

Dr. Smet

Abstract:

The objective of the proposed research is to model, design and demonstrate a novel 3D embedded package technology for next-generation high-performance computing (HPC) systems. The proposed research focuses on the following objectives: (1) design a 3D package to achieve >1 Tbps bandwidth at <1 pJ/bit power-efficiency and (2) develop materials and processes to fabricate and demonstrate such a package. With the slowing down of Moore's law scaling, HPC systems today pursue heterogeneous integration of logic and memory chips on the package. Hence, the bandwidth and power-efficiency (measured as energy-per-bit) of chip-to-chip communication becomes the limiting factor in scaling system performance. These two key metrics are primarily driven by I/O count, interconnect length, wiring density and the choice of dielectric materials. Today, the technology options for package-level integration in HPC are either 2.5D/3D and chip-first/chip-last architectures. While 3D and chip-first technologies solve the interconnect length and I/O count challenges respectively, they are still fundamentally limited in scaling the driving factors for bandwidth and power-efficiency comprehensively. This research proposes a novel chip-first 3D packaging technology using glass-based panel embedding to simultaneously address I/O density and interconnect length while utilizing low-dk/df materials and low-loss polymer RDL technologies. Through modeling and characterization, the electrical design of such a system will be studied. A design-space exploration of key substrate parameters to assess the bandwidth and energy-per-bit potential of proposed structure will also be conducted and benchmarked against state-of-the-art technology options. The materials and processes will be studied and a stable fabrication process flow will be established to demonstrate such a 3D package in a panel-scalable, low-cost and thermo-mechanically reliable fashion.