event

MS Defense by Rishika Jakhar

Primary tabs

THE SCHOOL OF MATERIALS SCIENCE AND ENGINEERING
GEORGIA INSTITUTE OF TECHNOLOGY

 


Under the provisions of the regulations for the degree
MASTER OF SCIENCE

On Monday, April 24, 2023 

11:00 AM 

MRDC 3515 

 

will be held the

MASTER’S THESIS DEFENSE 

for 

Rishika Jakhar 

  


“Fabrication & Characterization of Low Tortuosity Cathode for Sodium-Ion Batteries”

  

Committee Members: 

Dr. Gleb Yushin, Advisor, MSE 

Dr. Preet Singh, MSE 

Dr. Faisal Alamgir, MSE 

 

  

ABSTRACT:

Sodium-ion batteries (SIBs) are an attractive alternative to lithium-ion batteries (LIBs) given sodium’s (Na) abundant availability, lower cost, and comparable energy storage characteristics. There is an increasing impetus to increase the energy densities and specific energies of SIBs. One of the ways to achieve this is to produce thicker electrodes with higher areal mass and capacity loadings in order to reduce the relative weight and volume fractions of inactive SIB components, such as current collectors and separators. Unfortunately, fabricating thicker electrodes by conventional slurry-casting methods presents two challenges – (i) avoiding the loss of mechanical strength and (ii) retaining fast ion transport within thick electrodes. In our proof-of-concept studies, SIB cathodes were fabricated using a phase inversion technique to be free-standing, exhibit over 100 µm thickness and possess vertically aligned pores. The electrochemical performance of such electrodes was investigated by studying their charge-discharge (C-D) profiles at different current densities and conducting cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements in half cell configurations. The effects of electrolyte composition and solid electrolyte interphase (SEI) additives were additionally investigated in symmetric cell configurations. The performance characteristics attained suggest a promise of this approach for a broad range of SIB and other battery chemistries. Further work on optimizing the pore shape, pore size distribution and pore volume is expected to further boost cell performance. 

 

 

Status

  • Workflow Status:Published
  • Created By:Tatianna Richardson
  • Created:04/18/2023
  • Modified By:Tatianna Richardson
  • Modified:04/18/2023

Categories

Keywords

Target Audience