Georgia Tech and the University of California Collaborate to Create a New Crush-Resistant Tensegrity Metamaterial

Contact

Walter Rich

Sidebar Content
No sidebar content submitted.
Summaries

Summary Sentence:

go-imat, 3D Tensegrity Lattices: Study shows how century-old design principle can be a pathway to overcoming failure.

Full Summary:

No summary paragraph submitted.

Media
  • 3D Tensegrity Lattices 3D Tensegrity Lattices
    (image/jpeg)
  • Tensegrity Metamaterials: Overcoming Failure via Delocalized Deformation Tensegrity Metamaterials: Overcoming Failure via Delocalized Deformation
    (YouTube Video)
  • Julian Rimoli Julian Rimoli
    (image/jpeg)
  • Lorenzo Valdevit Lorenzo Valdevit
    (image/jpeg)

Catastrophic collapse of materials and structures is the inevitable consequence of a chain reaction of locally confined damage – from solid ceramics that snap after the development of a small crack to metal space trusses that give way after the warping of a single strut.

In a study published this week in Advanced Materials, engineers at the Georgia Institute of Technology and the University of California, Irvine (UCI) describe the creation of a new class of mechanical metamaterials that delocalize deformations to prevent failure.

The team turned to tensegrity, a century-old design principle in which isolated rigid bars are integrated into a flexible mesh of tethers to produce very lightweight, self-tensioning truss structures.

Professor Julian Rimoli, faculty member in the School fo Aerospace Enginering and the Georgia Tech Manufacturing Institute, and his team were developing structural configurations for planetary landers when they discovered that tensegrity-based vehicles could withstand severe deformation – or buckling – of its individual components without collapsing, something never observed in other structural solutions.

“This gave us the idea of creating metamaterials that exploit the same principle, which led us to the discovery of the first-ever 3D tensegrity metamaterial,” explained Rimoli, aerospace engineering professor and co-author of the study.

Starting with 950 nanometer-diameter members, the team used a sophisticated direct laser writing technique to generate elementary cells sized between 10 and 20 microns. These were built up into eight-unit supercells that could be assembled with others to make a continuous structure.

The researchers then conducted computational modeling and laboratory experiments and observed that the constructs exhibited uniquely homogenous deformation behavior free from localized overstress or underuse.

The team showed that the new metamaterials feature a 25-fold enhancement in deformability and an orders-of-magnitude increase in energy absorption over state-of-the-art lattice arrangements.

“Tensegrity structures have been studied for decades, particularly in the context of architectural design, and they have recently been found in a number of biological systems,” said senior co-author Lorenzo Valdevit, a UCI professor of materials science and engineering who directs the Architected Materials Group.

“Proper periodic tensegrity lattices were theoretically conceptualized only a few years ago by our co-author Julian Rimoli, but through this project we have achieved the first physical implementation and performance demonstration of these metamaterials.”

Made possible by novel additive manufacturing techniques, extremely lightweight yet strong and rigid conventional structures based on micrometer-scale trusses and lattices have been of keen interest to engineers for their potential to replace heavier, solid substances in aircraft, wind turbine blades and a host of other applications.

Though possessing many desirable qualities, these advanced materials can – like any load-bearing structure – still be susceptible to catastrophic destruction if overloaded.

“In familiar nano-architected materials, failure usually starts with a highly localized deformation,” said first author Jens Bauer, a UCI research scientist in mechanical and aerospace engineering. “Shear bands, surface cracks, and buckling of walls and struts in one area can cause a chain reaction leading to the collapse of an entire structure.”

He explained that truss lattices begin to collapse when compressive members buckle, since those in tension cannot. Typically, these parts are interconnected at common nodes, meaning that once one fails, damage can quickly spread throughout the entire structure.

In contrast, the compressive members of tensegrity architectures form closed loops, isolated from one another and only connected by tensile members. Therefore, instability of compressive members can only propagate through tensile load paths, which – provided they do not rupture – cannot experience instability. Push down on a tensegrity system and the whole structure compresses uniformly, preventing localized damage that would otherwise cause catastrophic failure.

Tensegrity Metamaterial

According to Valdevit, who’s also a professor of mechanical and aerospace engineering at UCI, tensegrity metamaterials demonstrate an unprecedented combination of failure resistance, extreme energy absorption, deformability and strength, outperforming all other types of state-of-the-art lightweight architectures.

“This study provides important groundwork for design of superior engineering systems, from reusable impact protection systems to adaptive load-bearing structures,” he said.

This research was made possible by funding from NASA and the National Science Foundation, as well as research conducted by Georgia Tech aerospace engineering graduate student, Julie Kraus and Cameron Crook, a UCI graduate student in materials science and engineering.

Additional Information

Groups

Georgia Tech Manufacturing Institute (GTMI)

Categories
Aerospace
Related Core Research Areas
Manufacturing, Trade, and Logistics
Newsroom Topics
No newsroom topics were selected.
Keywords
go-gtmi
Status
  • Created By: Walter Rich
  • Workflow Status: Published
  • Created On: Mar 25, 2021 - 11:11am
  • Last Updated: Mar 26, 2021 - 10:24am