PhD Thesis Defense by: Hanif S. Hoseini

Event Details
  • Date/Time:
    • Thursday March 29, 2018
      11:00 am - 1:00 pm
  • Location: Montgomery-Knight building, room MK325.
  • Phone:
  • URL:
  • Email:
  • Fee(s):
    N/A
  • Extras:
Contact
No contact information submitted.
Summaries

Summary Sentence: A Joined 3D/1D Finite Element Method for Aeroservoelastic Analysis of Damaged HALE Aircraft Wings

Full Summary: No summary paragraph submitted.

Thursday March 29, 2018 at 11:00 am; Montgomery-Knight building, room MK325.

 

PhD Thesis Defense by: Hanif S. Hoseini

 

Title:

A Joined 3D/1D Finite Element Method for Aeroservoelastic Analysis of Damaged HALE Aircraft Wings

 

Abstract:

Nonlinear aeroelastic analysis of damaged High-Altitude-Long-Endurance aircraft wings is considered. The structural model consists of a full three-dimensional finite element continuum model for the damaged area, which is a small localized area of the wing, and a geometrically exact one-dimensional displacement-based finite element model for the undamaged part of the wing. The solid and the beam parts are then rigorously combined using a transformation between the joined nodes of the two models at their intersection. The transformation is derived using the recovery equations of variational asymptotic beam model and employed to eliminate the six degrees of freedom of the single joined node of the beam. The validity and efficiency of the method is demonstrated using test cases involving cracks and delaminations in the solid part. It is shown that although the accuracy remains virtually the same between the full three-dimensional model and the joined one-dimensional/three-dimensional model, the computational cost is considerably lower for the latter. Finite-state induced flow theory of Peters is exploited as the unsteady aerodynamic model to compute aerodynamic forces and moments acting on the wing. Combining the structural and aerodynamic models, a dynamic nonlinear aeroelastic element is developed for the time simulation of the dynamic responses of composite high aspect-ratio wings. The model has been used for analyzing aeroelastic instability boundaries and time simulations, as well as synthesizing an active flutter suppression control system. Numerical results verifying the validity of the method are presented and the results are discussed. The proposed joined model will enables the High-Altitude-Long-Endurance aircraft designers to tackle the problem of aeroelasticity in a computationally efficient manner, without sacrificing accuracy with regard to full three-dimensional models, hence reducing the overall time and cost of the design process.

 

Committee members:

Prof. Dewey H. Hodges (AE)

Prof. George Kardomateas (AE)

Prof. Julian J. Rimoli (AE)

Prof. Arash Yavari (CEE)

Prof. Donald White (CEE)

Additional Information

In Campus Calendar
No
Groups

Graduate Studies

Invited Audience
Faculty/Staff, Public, Graduate students, Undergraduate students
Categories
Other/Miscellaneous
Keywords
Phd Defense
Status
  • Created By: Tatianna Richardson
  • Workflow Status: Published
  • Created On: Mar 27, 2018 - 10:17am
  • Last Updated: Mar 27, 2018 - 10:17am