event

Transmission Expansion Planning with Linear Optimal Power Flow using Cycle Flows

Primary tabs

Hosted by IEEE PES @ Georgia Tech

Linear optimal power flow (LOPF) formulations use a linearization of the AC load flow equations. The common formulation uses voltage angles at the buses as auxiliary optimization variables, but alternatives can be computationally advantageous. It is possible to circumvent the auxiliary voltage angle variables by expressing Kirchhoff's voltage law based on a cycle basis of the network graph. In computationally challenging benchmarks such as multi-period LOPF with storage dispatch and generation capacity expansion, this formulation incurred speed-ups by an order of magnitude. Including transmission expansion planning (TEP) adds to the problem complexity as it is bilinear (unless using a big-M disjunctive relaxation) due to the dependence of line expansion on line impedance and nonconvex because of a discrete set of line expansion options. This talk will guide through a derivation of a cycle-based mixed-integer linear formulation of the transmission expansion planning (TEP) problem instead of using an angle-based formulation and will motivate why it is necessary for spatially and temporally resolved energy system models that co-optimize generation, transmission and storage infrastructure. Bio: Fabian Neumann is pursuing a PhD at the Karlsruhe Institute of Technology (KIT) in Germany, where he works on methods to improve power and gas transmission network infrastructure representations in cross-sectoral energy system optimisation problems. He holds a MSc degree ('17) in Sustainable Energy Systems of the University of Edinburgh and a BSc degree ('16) in industrial engineering from KIT.

Groups

Status

  • Workflow Status:Published
  • Created By:Kristen Bailey
  • Created:10/03/2019
  • Modified By:Kristen Bailey
  • Modified:10/03/2019

Keywords

  • No keywords were submitted.